Luminy L105
Luminy® L105 is a high heat, high flow PLA homopolymer suitable for thin wall injection molding and fiber spinning. PLA is a biobased polymer derived from natural resources and offers a significant reduction in carbon footprint compared to oil-based plastics.
Introduction
PLA is a biobased polymer derived from natural resources and offers a significant reduction in carbon footprint compared to oil-based plastics.
Luminy® L105 is a high heat, high flow PLA homopolymer suitable for thin wall injection molding and fiber spinning.
Compared to standard PLA, these PLA homopolymers have higher melting points and an increased rate of rystallization.
As a result, compounds containing PLA homopolymers are suitable for the production of semi-crystalline parts, which exhibit a higher temperature resistance.
Main Grades
| Physical |
Test Method | Data | Unit |
| Density | Internal Testing Methods | 1.24 | g/cm3 |
| Melt Index (210℃ 2.16 kg ) | ISO 1133 | 70 | g/10min |
| Melt Index (190℃ 2.16 kg ) | ISO 1133 | 30 | g/10min |
| Moisture content Karl Fischer titration method | Internal Testing Methods | 400 | ppm |
| Residual monomers | Internal Testing Methods | 0.3 | % |
| Glare purity | Internal Testing Methods | 99 | % |
| Mechanical | Test Method | Data | Unit |
| Stretch film quantity | ISO 527 | 3500 | MPa |
| Tensile strength | ISO 527 | 50 | MPa |
| Elongation fracture | ISO 527 | 5 | % |
| Notch impact on simply supported beams 23℃ | ISO 179 | 5 | KJ/m2 |
| Thermal Performance | Test Method | Data | Unit |
| Hot deformation temperature 0.45MPa Amorphous | ISO 75 | 60 | ℃ |
| Hot deformation temperature 0.45MPa Crystal | ISO 75 | 105 | ℃ |
| Melting temperature DSC | Internal Testing Methods | 175 | ℃ |
| Glass transition temperature DSC | Internal Testing Methods | 60 | ℃ |
Application
- 3D printing materials
- Food container
- Food packaging application
- Disposable tableware
Features
- TYPICAL PROPERTIES
Density Literature value 1.24 g/cm3
Melt flow index ISO 1133-A (210°C/2.16kg) 70 g/10 min
Melt flow index ISO 1133-A (190°C/2.16kg) 30 g/10 min
Stereochemical purity Total Corbion PLA method ≥ 99% (L-isomer)
Appearance Visual Crystalline white pellets
Residual monomer Total Corbion PLA method ≤ 0.45%
Water / moisture Coulometric Karl-Fischer ≤ 400 ppm
Melting temperature DSC 175°C
Glass transition temperature DSC 60°C
Parameters
| Minimum Order Quantity: | 25kg |
| Price: | $1.5-$3 |
| Packaging Details: | 25kg/bag |
| Delivery Time: | 3-5 working days to departure port |
| Payment Terms: | TT/LC |
| Supply Ability: | 1000MT/Month |